DAT BOSS MIX LR Full Band

VHF (low, high) stations are broadcasting with lower power, so the choice of an antenna which performs well in this band is critical to receive TV stations in good conditions. We have some good choices for VHF reception, like the Ellipse MIX, the DAT BOSS MIX LR, or the DAT BOSS MIX LR Full band, all equipped with our exclusive BOSS amplification system with TForce technology.
Read more

Yagi antennas are formed by a dipole, the reflectors and one or more directors. The dipole is the element that gather the broadcast electromagnetic energy (works as the sensor element) and has the appropriate dimensions to operate in the frequency band of the antenna. The reflector placed behind the dipole avoids the back reception of signals, reinforcing the frontal reception. The directors which are placed in front of the dipole narrow the beam or reception lobe of the antenna, increasing its gain and directivity. This way, the antenna can receive TV stations at longer distances while, increasing its directivity, blocking inference.
Read more

Our antennas have an exclusive feature that other active antennas do not have: BOSSTech® Technology, which provides the appropriate (regulated) signal level no matter the reception scenario. In case of antennas working in VHF and UHF, the regulation of signal level is adjusted separately (VHF, UHF) to take into consideration the different broadcasting conditions of the two bands. Also, the antennas can work in intelligent mode (power on) and in passive mode (power off), thus increasing its dynamic range. Last, but not least, the antennas perform mechanical and electronic filtering to get rid of unwanted interferences broadcasted in the UHF band that could potentially impair TV reception. In simple terms, BOSSTech® is a very sophisticated AGC amplifier on a chip designed by our engineers with 5G filtering that adjusts in real-time to current and changing conditions of broadcast TV signals, providing a more stable signal to the TV.
Read more

We call a fringe area that is about 100 miles or more from the television station. We recommend for this application the DAT BOSS MIX LR, which LR stands for Long Range or high distance, to receive good signal quality in these so-called fringe areas. This antenna outperforms others due to its high directivity, high gain, low noise and TForce Technology to receive weak signals in the most difficult reception conditions.
Read more

Receiving excessive signal (location very close to the broadcasting tower) can be as bad as having poor signal. In case of excessive signal, the use of a high dynamic range antenna is recommended, like the Ellipse or the DAT BOSS MIX LR, which adjust the output level no matter the reception conditions in order not to overdrive the TVs.
Read more

An intelligent antenna has an integrated built-in amplifier, while a passive antenna does not have an amplifier. An intelligent antenna will work on active mode if it’s connected to power provided from a downstream power supply, receiving power through the coax cable. A passive antenna is not an active component even when connected to a pre-amplifier, it is rather just a passive component of an active system.
Read more