Power Supply Unit (UL listed) with 2 outputs
Replacement power supply unit for powering our smart antennas or mast amplifiers
Optimized power consumption
UL Listed
Designed for USA
Replace easily the power supply of your smart antenna or mast amplifier, in case of loss or misplacement of it, so that they continue to operate properly. This is an ecological and cost-effective alternative to unforeseen events, which allows you to preserve your equipment, avoiding the purchase of unnecessary elements.
This domestic power supply unit feeds our antennas and mast amplifiers through the coaxial cable, also enabling the passage of the TV signal with no need of additional cables. It is an essential complement for its operation, offered as a replacement accessory.
Note how to install the PSU in each of the cases, check: “How to get the best signal on your TV”
Moreover, you can expand the TV signal up to 2 TVs or devices without additional equipment, thanks to the built-in 2-ways splitter.
In stock
Ref:
550104
Special Price
$39.95
Regular Price
$44.95
You save: $5.00
- Saves up to 40% in consumption due to high-performance switched-mode operation, optimizing power consumption
- Suitable for any corner, the low visual impact and discreet format makes it easy to install in any location
- Stable cable connection thanks to threaded F-connectors, which provide a firm and resistant grip against movement or pulling
- Maximum electrical protection assured by the UL Listed mark, essential for mains-connected equipment
- Convenient and space-saving, thanks to the small size of the power supply and the possibility of wall mounting with screws
- Expand your installation up to 2 TVs without additional equipment thanks to the 2-output splitter built-in the power supply. Through losses will be different when using one or two outputs
- IP20 protection index that prevents the ingress of solids that could damage the devicev
- European quality guarantee, as a result of manufacturing on 4.0 production lines, robotized and automated, allowing a detailed control of each step of the process
A good TV signal is only as good as the antenna and the equipment to deliver it
The F connector Power Supply, designed and manufactured in Europe, offers you high reliability and excellent performance, thanks to its state-of-the-art design and rigorous quality controls.
Televes brand is synonymous of reliability and confidence, our passion for quality is what drives us. We are manufacturers with more than 60 years of experience, and we produce in our own facilities, in automated and robotized lines, in order to maintain a total control over every stage of production. In addition, exhaustive quality controls are carried out in our certification laboratories, to guarantee every one of our customers the best results.
How to get the best signal on your TV?
To ensure that you receive a good signal in your TV it is necessary to have a proper installation. Whether you use a smart antenna or a passive antenna with a mast amplifier, a power supply unit is required for them to work. In both cases, the power supply must be located downstream of the equipment to be powered, without intermediate devices, so as not to interrupt the current flow or the TV signal.
Thus, as shown in the application examples, when powering a smart antenna, the following items must be installed: Smart Antenna, Power Supply Unit and TVs; in the case of feeding a mast amplifier, the order will be: Passive Antenna, Mast Amplifier, Power Supply Unit and Tvs. Additional splitters can be included between the power supply unit and the TVs to expand the installation, only if the signal level is strong enough.
Finally, it is also recommended to have an adequate distribution network, with the lowest losses, to ensure that the signal coming from the antenna reaches all TV outlets at the correct level.
What’s included
The package includes the following items:- Power supply unit
- Power cord, 39.37 in. Lenght
- Power supply data sheet
Packaging info
- Packaging type: Box
- Dimensions (in): 1,61 (W) x 5.98 (H) x 3.58 (D)
- Weight (lb): 0.73
- Location: Indoor
- Connector type: F-connector
- Frequency range: 5...862 MHz
- Through loss / Insertion loss (dB): 1 output 1.5 dB / 2 outputs 4 dB
- No. Input: 1
- No. Output: 2
- Power consumption (W): 3.6
- Power (Vdc): 12
- Power input (Vac): 108 ... 132
- Max current (mA): 220
- Product dimensions (in): 5.75 (W) x 2.09 (H) x 1.38 (D)
- Product weight (lb) : 0.49
Write Your Own Review
Frequently Asked Questions and Answers
-
Is an intelligent antenna an antenna with a mast amplifier?
No, an intelligent antenna is one that has the amplifier embedded in the antenna itself. Only at Televes we install preamplifiers in our antennas, so they are considered intelligent antennas. Stand alone preamplifier also called mast amplifier or boosters become the active component of the system when coupled with a passive antenna. In some cases depending on the quality, gain and noise figure of the pre-amplifier, it may not be able to sufficiently amplify weak signals resulting in pixilization or no signal at all. In these cases, it is recommended to install an intelligent antenna, amplifying the signal from the first moment, and, if necessary, also a mast amplifier.
Read more -
How do I know if the power supply is compatible with my antenna or mast amplifier?
To ensure that a power supply is compatible with your antenna or mast amplifier, there are several factors to consider: Voltage and current compatibility: the power supply must have the same voltage (power) and current as the original PSU Connection type: make sure that the connection mode is suitable, if an antenna cable without connector is used, the power supply must be able to be connected directly via coaxial cable Technical specifications: check the specifications of the original power supply and, if not available, verify the specifications of the antenna or amplifier to confirm the match. You can find this information in the user's manual or on the manufacturer's website In any case, it is always recommended to use the original replacement for various reasons, such as guaranteed compatibility, reliability, safety and technical support.
Read more -
Can I use any power supply for my smart antenna or mast amplifier?
No, not all power supplies are the same. It is essential to check the technical data of the power supply and the device (antenna or amplifier) to be powered to ensure compatibility. Using an incompatible power supply may damage your antenna or mast amplifier. Therefore, the power supply unit must have the same technical specifications as the original one: same voltage (power), amperage (current) and connection type. To ensure correct compatibility in a simple and safe way, the most recommended option is to purchase the same original power supply unit. Using a replacement from the same manufacturer guarantees maximum compatibility and reliability.
Read more
Join Over-The-Air TV, and enjoy your favorite channels and even more, with no extra fees
Compatible with the most advanced high-definition digital TV standards
